Models > AS130B

AS130B Jenn-Air Refrigerator - Overview

Get Parts and Repair Help for AS130B

If you know the refrigerator repair part you need, you can browse the list of all parts on the AS130B, or you can search by name or part description. You can also find your part by where it is located on the AS130B by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AS130B [Viewing 1 of 1]

$3.76

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

$28.21

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$4.60

SCREW

$67.82

Solid Surface Burner - 6"

$4.60

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

$2.70

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$3.83

BRACKET

SILICONE SEAL (sold individually, 6 recommended)

SILICONE SEAL (sold individually, 8 recommended)

ELEMENT, SOLID (LARGE)

Common Symptoms of the AS130B [Viewing 1 of 153]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The top would not heat,large or small eye.

  • Customer: Calvin from Merced CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 9 of 15 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

cook top module would not heat.

  • Customer: Daryl from Olathe KS
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 4 people found this instruction helpful
The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to the original black.... read more

one side of cooktop did not work

  • Customer: Rebecca from Broadway NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 5 people found this instruction helpful
I took out the side of the cooktop that did not work. I had to take off the bottom of the cooktop and checked where electricity was going and not going. Once I found the part that needed replacing, I went on the website, search for Jen-Air cooktops and model number. From the sketch on the website, I was able to order the part needed. I decided to get 2 in or... read more