Models > ARDS801WW (P1131923N)

ARDS801WW (P1131923N) Amana Range - Overview

Get Parts and Repair Help for ARDS801WW

If you know the range repair part you need, you can browse the list of all parts on the ARDS801WW, or you can search by name or part description. You can also find your part by where it is located on the ARDS801WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for ARDS801WW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.


2 Piece Broiler Pan

The top of this part is now black.


Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).


Oven Rack

Sold individually.


Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.



Sold individually.


Main Power Terminal Block


Outer Bake Element - 2800W

This bake element is found on the bottom of the oven.


Hinge Kit - Right Side

This hinge is located on the right side of the door.


Oven Light

This oven light assembly is a little over four inches long. It is a six hundred an sixty watt light bulb.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Getting F 1 and 2 error codes and the oven turned itself off.

  • Customer: Suzanne from Acton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 53 of 105 people found this instruction helpful
Really easy but in this model there are 2 versions of the sensor, male and female. The website didn't have any place to see that. So the first sensor that came was male but we needed the other. After calling they sent me a return form and sent the new part (which was actually much cheaper) overnight and it went in very quickly. Would check this out again wh... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 39 of 94 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Modern Maid Oven, Bake element barely warming

  • Customer: Philip from Severna Park MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 9 of 11 people found this instruction helpful
1. Locate range breaker and switch off.
2. Verify range has no power by switching fan or light on.
3. Have someone shine flashlight beam on inside back of oven.
4. Use screwdriver to remove two screws holding outer element to back of oven wall.
5. Carefully pull element out until wires attached to ends of element can be seen.
6. Pull... read more