Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ARB2117BC (PARB2117BC0)

ARB2117BC (PARB2117BC0) Amana Refrigerator - Overview

Get Parts and Repair Help for ARB2117BC

If you know the refrigerator repair part you need, you can browse the list of all parts on the ARB2117BC, or you can search by name or part description. You can also find your part by where it is located on the ARB2117BC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for ARB2117BC parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$97.39

Replacement Ice Maker

NOTE: This replacement ice maker mechanism does NOT come with a cover,shut off arm, a wire harness, or the mounting hardware. Must be ordered separately.

$23.23

Light Switch

This part turns on the light when the door is opened.

$17.74

Defrost Timer Kit - 120V 60Hz

The timer will shut off the cooling system of the refrigerator and the defrost heater will turn on.

$16.01

Crisper Drawer Cover Support Post

This part helps support the crisper drawer lid.

$6.28

Screw Kit

Includes 2 screws.

$64.87

Cold Control Thermostat

This cold control thermostat cycles on and off regularly to keep your refrigerator cold.

$4.63

Screw

This screw is sold individually

$4.89

SCREW

$5.51

Drawer Roller Wheel

This drawer roller wheel is all white in color and is made entirely of plastic. This wheel is used with the drawers of some refrigerators.

$4.79

GROMMET- C

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Icemaker producing few or no cubes and often leaving "kling-ons" on ice tray

  • Customer: Bernie from Diamond Bar, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 667 of 704 people found this instruction helpful
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment screw & bracket at lower front of icemaker.
Disconnect wiring harness from socket @ rear of compartment.
Tricky part was determining what type of con... read more

Water overflowed ice maker turnning ice bucket into solid mass of ice

  • Customer: Harry from Grand Ledge, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 244 of 317 people found this instruction helpful
My ice maker has been shedding its non-stick coating for over a year. Within the last month of so, it started pouring water into the ice bucket below, turning it into a solid mass of ice. So I purchased a new ice maker assembly. I encountered two problems not mentioned in the 21 or so do-it-yourselfer repair stories that precede this one. First problem: o... read more

freezer door gasket needed replacing

  • Customer: Jeffrey from Palo Alto, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 98 of 112 people found this instruction helpful
Unplug refrigerator. Open freezer door. Lift the old gasket from the edge closest to the center of the door to expose the hex-head screws. Get a nut driver the appropriate size (1/4" if I remember) and loosen, but do not remove all of the screws. Once loosened, the old gasket can be removed. Slip the new gasket in just like the old one was. Lift the ed... read more