Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AOR27DE (P1132341N E)

AOR27DE (P1132341N E) Amana Microwave - Overview

Get Parts and Repair Help for AOR27DE

If you know the microwave repair part you need, you can browse the list of all parts on the AOR27DE, or you can search by name or part description. You can also find your part by where it is located on the AOR27DE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for AOR27DE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$21.46

2 Piece Broiler Pan

The top of this part is now black.

$63.67

GASKET- OV

$3.17

Nut

Gasket - sold by the foot

This gasket is gray and is made of a spongy material. This gasket is used for many air conditioners. It will come to you at the length you specify: one foot, two feet, whatever you...

Glass Floor Tray

Sits under the rack.

DISCONTINUED

$4.94

Screw, 6-32 X 1/2

RACK, OVEN 19 3/16 X 16 1/2

SCREW

Common Symptoms of the AOR27DE

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven element burnt out and broke apart.

  • Customer: Lana from Pineville, WV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 15 people found this instruction helpful
After ordering the element, found out it was the wrong element, I needed an 18.5 inch x 15.5 instead of the 15 1/4 x 15 1/2"...I slowly bent the element in shape to fit my oven. It works beautiful.
But for you guys, order the right one. Don't forget to measure your old elements spread from connection to connection. Install the new element and then test ... read more

hard to get old one out

  • Customer: robert from chatham, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 27 of 61 people found this instruction helpful
easy to put in read more

Element broken, oven would'nt heat

  • Customer: frances from Coffee Springs, AL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 7 people found this instruction helpful
First I removed the two screws that hold the element in place. Then I pulled the element out about 3 inches and disconnected the two wires. Reconnected the new wires, put the screws back in and the oven WORKED!! read more