Models > AOCS3040E (P1132348N E)

AOCS3040E (P1132348N E) Maytag Wall Oven - Overview

Get Parts and Repair Help for AOCS3040E

If you know the wall oven repair part you need, you can browse the list of all parts on the AOCS3040E, or you can search by name or part description. You can also find your part by where it is located on the AOCS3040E by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for AOCS3040E parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.


2 Piece Broiler Pan

The top of this part is now black.


Oven Rack

Sold individually.


Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.


Oven Light

This oven light assembly is a little over four inches long. It is a six hundred an sixty watt light bulb.


Broil Element - 240V 3000W



This screw is sold individually.


Door Hinge - Left Side





Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Getting F 1 and 2 error codes and the oven turned itself off.

  • Customer: Suzanne from Acton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 56 of 111 people found this instruction helpful
Really easy but in this model there are 2 versions of the sensor, male and female. The website didn't have any place to see that. So the first sensor that came was male but we needed the other. After calling they sent me a return form and sent the new part (which was actually much cheaper) overnight and it went in very quickly. Would check this out again wh... read more

Cracked inside glass window of oven door

  • Customer: Uday from Ann Arbor MI
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 7 of 7 people found this instruction helpful
1. Slide the Oven door out of its hinges after removing the screws - see Owner's manual.
2. Place door on floor with the inside face on the floor.
3. Remove screws on side and bottom of door and the lift away the side stamped pieces.
4. Remove screws as they becom visible and lift away the pieces till you reach the inside glass.

R... read more

Broil element broken

  • Customer: Frederick from Snow Hill MD
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 5 of 5 people found this instruction helpful
First, turn off power to oven. There are six Phillips head screws on the pan above the element and 2 securing the element to the pan. Remove all screws and pull unit toward you, then slide off electrical wires from the element. To remove the element from the pan use the pliers to bend back metal hooks. Place new element under hooks, bending the metal to ... read more