Models > AO24SE2 (P1132351N B)

AO24SE2 (P1132351N B) Amana Oven - Overview

Get Parts and Repair Help for AO24SE2

If you know the oven repair part you need, you can browse the list of all parts on the AO24SE2, or you can search by name or part description. You can also find your part by where it is located on the AO24SE2 by selecting a section below. We’ve also included any installation videos we have for AO24SE2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AO24SE2 [Viewing 3 of 3]

$2.52

Light Bulb - 40W

Sold individually.

$18.07

2 Piece Broiler Pan

$11.63

Main Power Terminal Block

ELEMENT-BAKE

SPACER, HANDLE (BLACK)

KNOB, CLOCK

DISCONTINUED

$99.95

ELEMENT- B

THERMOSTAT

SPACER- TR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Loose terminal caused block to overheat and break

  • Customer: Dana from Black Mountain NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 5 of 8 people found this instruction helpful
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well. read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

I snapped a bolt on the main power terminal block when connecting the pigtail.

  • Customer: Frank from Palm Coast FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 3 of 4 people found this instruction helpful
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main... read more