Models > ALZ8590ADS

ALZ8590ADS Amana Cooktop - Overview

Get Parts and Repair Help for ALZ8590ADS

If you know the cooktop repair part you need, you can browse the list of all parts on the ALZ8590ADS, or you can search by name or part description. You can also find your part by where it is located on the ALZ8590ADS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ALZ8590ADS [Viewing 3 of 3]

$25.99

Burner Head Cap with Spark Electrode

This part has been redesigned and no longer requires a gasket seal.

$3.84

SCREW

$99.00

Regulator Kit with Fitting

This part will cut off the flow of gas to your appliance once it reaches a certain pressure.

$25.59

Seal Tape

This piece of adhesive seal tape is eighty-nine inches long. It is made of black rubber and has a white backing that peels off easily. This seal tape is designed to fit around the drip pans of your appliance.

$4.60

SCREW

$2.70

Washer

GROMMET- G

$3.84

SCREW

$21.84

KNOB- VALV

$3.84

Valve Screw

Holds top burner valve onto the manifold. Part may also appear different than the original, but will function the same.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner wouldn't start

  • Customer: Yury from Brooklyn NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 17 of 26 people found this instruction helpful
Make a quarter turn counterclockwise, disengage a burner head, disconnect 2 wires, connect to a new head, install turn clockwise.

That's it! read more

burner head was rusted out. ordered 1 to see if part was correct. ordered 4 more to finish job.

  • Customer: Robert from Somerville TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 10 people found this instruction helpful
unscrewed old burner head ;disconnected 2 wires; repaced with new burner head and replaced wires. Unfortunately, before we really needed to replace the other burner heads, the cooktop itself developed a gas leak. We decided to replace the whole thing, and therefore would like to return the unboxed, unused 4 remaining burner heads. read more

BURNER HEAD RUSTED OUT

  • Customer: Edmundo from San Antonio TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
SLIGHTLY TURN BURNER HEAD CLOCKWISE AND IT COMES OUT. PULLED OUT SPARK ELECTRODE WIRE AND HAND INSTALLED IT INTO NEW PIECE. CLEANED AREA AND REPLACED BURNER HEAD WITH A SLIGHT TWIST TO LOCK IN PLACE. BOUGHT TWO AND HAVE SPARE ONE LEFT. OTHER THREE BURNERS ARE OK BUT SLIGHTLY RUSTED. WE ARE READY FOR THE NEXT ONE TO SHOW A LEAK. MAY JUST REPLACE THE ONE ... read more