Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ALW540RMW (PALW540RMW0)

ALW540RMW (PALW540RMW0) Amana Washer - Overview

Get Parts and Repair Help for ALW540RMW

If you know the washer repair part you need, you can browse the list of all parts on the ALW540RMW, or you can search by name or part description. You can also find your part by where it is located on the ALW540RMW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for ALW540RMW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$10.35

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

Order within the next 15 mins and your part ships today!

Drain Pump

This pump is attached to the motor and helps expel water from the washing machine. It is activated after the spin speed is maintained for a specific period of time.

$63.50

Water Inlet Valve Kit

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount o...

Order within the next 15 mins and your part ships today!
$27.04

Brake Pad Kit

This brake pad kit contains three brake pads and six installation screws. Helps to bring a rotating cycle to a stop.

Order within the next 15 mins and your part ships today!
$19.22

Standpipe Adapter

This part helps stop the washer from overflowing.

Order within the next 15 mins and your part ships today!
$55.15

Flex Vane Agitator

This white agitator is used for belt driven washing machines.

Order within the next 15 mins and your part ships today!
$29.57

Spin Pulley for Transmission Drive

This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.

Order within the next 15 mins and your part ships today!

Plastic Washer

This washer is located between the brake and transmission drive pulley.

$28.58

Friction Ring

Order within the next 15 mins and your part ships today!
$7.93

Screw

Sold individually. 1/4-20

Order within the next 15 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Belt wore out

  • Customer: Bruce from Medina, OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 163 of 187 people found this instruction helpful
Had to remove pump-not easy. Nothing wrong with pump, but had to trash it to get it off the motor shaft, so I had to replace it, too.

Pop up top of cabinet and remove front panel. (I leaned unit back against a wall to facilitate internal access once panel was removed.)


Remove motor assy - 4 screws & connector.

Remove ... read more

The spin belt failed due to overloading the washing machine.

  • Customer: Mark from Cheektowaga, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 38 of 41 people found this instruction helpful
Unplugged the washing machine and turned off the water to the machine. Removed the two front covers; unhooked the two front springs; removed the (4) motor mounting bolts; unhooked the two hoses for the water pump; unhooked the wiring harness; removed the belt from the driven pulley; pulled the motor assembly out; removed the (3) screws to separate the water... read more

Water leaking on floor from "mysterious place underneath washer"

  • Customer: Bryan from Chicago, IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Socket set
  • 37 of 42 people found this instruction helpful
Water was leaking on the floor during the wash cycle and especially during draining of the washer. I removed the front panel at ground level and watched while draining after a rinse.

I t was obvious that water was spraying from a hole in the rubber end of the hose (the hose is a fused assembly of a plastic section and a rubber section).

read more