Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ALE866SBW

ALE866SBW Amana Dryer - Overview

Parts and Repair Help for models starting with ALE866SBW

If you know the dryer repair part you need, you can browse the list of all parts for models starting with ALE866SBW, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for ALE866SBW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with ALE866SBW

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$16.63

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$18.75

Door Switch Kit

This part replaces older two terminal switches.

$24.69

Blower Wheel

Part may differ in appearance, but functions same as original part.

$68.42

Lint Duct Assembly

This part includes the upper and lower air duct assembly and lint screen.

$7.60

Door Strike Bracket

$32.87

HOUSING- B

$5.94

SEAL- BLOW

$71.90

SEAL LIN

Moisture Sensor

Hex Screw - 1/4-20

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drum not centered , clothes getting stuck in dryer

  • Customer: Chris from Hopedale, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 486 of 492 people found this instruction helpful
The first thing I did was to unplug the dryer from the wall. Then I removed the bottom two screws and slid the bottom cover off so i could see all the way to the back, I tipped the dryer back against the wall and searched for the problem with a flashlight. I noticed that one of the guide wheels that held the drum in place was sheared off. I took the new d... read more

The Felt Gasket between drum and door ripped, vent manifold from Dryer to fan and lint screen broken

  • Customer: Tim from South Glens Falls, NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 477 of 480 people found this instruction helpful
I pulled the bottom panel and the door panel to replace the manifold and felt gasket around the drum. I removed old gasket very easily, it peeled right off. I use brake cleaning fluid (Spray Can from Auto Zone about $1.45) to remove old glue. Used spray contact cement (Elmer's about 4.50 at Ace) and sprayed the panel and gasket surfaces and let dry. I th... read more

Squeeling and grinding noise

  • Customer: Steven from Holderness, NH
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 426 of 431 people found this instruction helpful
Wasn't the belt!! Changed it anyway. Should have come here earlier. That mistake added several days to the repair waiting for a second batch of the right parts. Became a pro at taking the dryer apart and reassembling, though! Easy job, just take your time and mark your wires, if you need to.
Followed other people's excellent instructions. Clean out al... read more