Models > ALE331RAW (PALE331RAW) > Parts

ALE331RAW (PALE331RAW) Amana Dryer - Parts

All parts for the Amana Dryer ALE331RAW

Below is a list of all parts for the Amana Dryer ALE331RAW - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ALE331RAW
1-14 of 87
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.60

Multi-Rib Belt

At 93-3/8" in length, this flat dryer drum belt has 5 ridges and is 3/8" wide.

$9.02

Drum Support Roller

This roller is for square-ported models and has a metallic bearing in its center. They are sold individually and most dryers use 2 rollers at the rear and it is recommended to replace both at the same time.

$6.98

Drum Glide

This drum glide is sold individually. ***Please Note: these should be replaced in pairs.

$8.31

Idler Pulley Wheel with Bearing

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

$32.57

Lint Filter

Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.

$5.11

High Limit Thermal Fuse

Meant as a backup to a high limit thermostat, this fuse is typically set to trip at a higher temperature than that of a high limit thermostat. This is a one-time use fuse, so when it does trip, you do need to replace it. It's letting you know that something is wrong with your dryer.

$4.45

Thrust Washer

This washer is 3/4 inches in diameter.

$17.12

Idler Lever

The spring for this part is sold separately.

$15.99

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$19.16

Cylinder Felt Seal

This part is located between the back of the drum and the rear dryer panel.

$18.02

Door Switch Kit

This part replaces older two terminal switches.

$46.29

Heating Element - 240V

This orange dot heating element replaces those elements with an orange dot on the element flange.

$23.17

Cylinder Glide Bracket

These brackets support each side of the tub. Order quantity needed.

$24.84

Limit Thermostat

This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 225 degrees Fahrenheit. The element will kick back in when the temperature drops to 185 degrees Fahrenheit - the differential of 40 degrees.

All Parts for the ALE331RAW
1-14 of 87