Models > AKS3050WW (P1142526NWW)

AKS3050WW (P1142526NWW) Amana Cooktop - Overview

Get Parts and Repair Help for AKS3050WW

If you know the cooktop repair part you need, you can browse the list of all parts on the AKS3050WW, or you can search by name or part description. You can also find your part by where it is located on the AKS3050WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AKS3050WW [Viewing 2 of 2]

$15.99

Spark Ignition Electrode

Sold Individually.

$37.12

BURNR-HEAD

$4.46

SCREW

$3.83

SCREW

$73.30

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$41.13

Spark Switch - 270 Degrees

This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.

$34.47

Top Burner - Small - 5k

$2.70

Bolt - m3x6

$79.52

Top Burner Valve

Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.

Ignition Wire Harness - 20"

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Electrode, no spark

  • Customer: HUY from ALISO VIEJO CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 29 of 36 people found this instruction helpful
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner read more

Burner would not ignite when control in "light" position

  • Customer: Michael from Friendswood TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 12 people found this instruction helpful
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the el... read more

One of the burners would not autolight, had to be lit with match

  • Customer: Derek from Seattle WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
This was VERY easy and I've never worked on this type of appliance before.

First, take off the grate, thermal plate, etc that are resting on top of the stove (this is all the stuff you take off to clean the stovetop).

Then, carefully unscrew the two screws holding the burner to the gas pipe. Grab the screws and set them aside so they d... read more