Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AKS3050SS (P1142526NSS)

AKS3050SS (P1142526NSS) Amana Cooktop - Overview

Get Parts and Repair Help for AKS3050SS

If you know the cooktop repair part you need, you can browse the list of all parts on the AKS3050SS, or you can search by name or part description. You can also find your part by where it is located on the AKS3050SS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AKS3050SS

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$84.79

Top Burner Valve

Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.

Double Burner Grate - Black

Ignition Wire Harness - 20"

HARNESS- I

$4.94

SCREW

Part might differ in appearance, but functions same as original. Sold individually.

BRKT, VENTURI MTG

VALVE- TOP

KNOB- TOP

SHIELD, SWITCH

SCREW, #8-18 X .500 AB (BLK)

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Electrode, no spark

  • Customer: HUY from ALISO VIEJO, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 39 of 47 people found this instruction helpful
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner read more

Burner would not ignite when control in "light" position

  • Customer: Michael from Friendswood, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 15 of 16 people found this instruction helpful
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the el... read more

One of the burners would not autolight, had to be lit with match

  • Customer: Derek from Seattle, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
This was VERY easy and I've never worked on this type of appliance before.

First, take off the grate, thermal plate, etc that are resting on top of the stove (this is all the stuff you take off to clean the stovetop).

Then, carefully unscrew the two screws holding the burner to the gas pipe. Grab the screws and set them aside so they d... read more