Models > AKS3040SS (P1142513NSS)

AKS3040SS (P1142513NSS) Amana Range - Overview

Get Parts and Repair Help for AKS3040SS

If you know the range repair part you need, you can browse the list of all parts on the AKS3040SS, or you can search by name or part description. You can also find your part by where it is located on the AKS3040SS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AKS3040SS [Viewing 2 of 2]

$14.45

Spark Ignition Electrode

Sold Individually.

$14.30

Surface Burner Knob

Sold individually. This knob accepts a D-shaped shaft.

$25.49

Burner Cap - 6000 BTU

$4.46

SCREW

$72.91

Spark Ignition Module with Bracket

$36.31

BURNR-HEAD

$2.70

Bolt - m3x6

$34.61

Top Burner with Electrode - Medium - 9k

$3.84

SCREW

$31.68

Burner Cap - 12/13K

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Electrode, no spark

  • Customer: HUY from ALISO VIEJO CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 30 of 37 people found this instruction helpful
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner read more

2 of 4 burners wouldn't light

  • Customer: John from Alexandria VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 18 of 20 people found this instruction helpful
Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one by one, put the sto... read more

Burner would not ignite when control in "light" position

  • Customer: Michael from Friendswood TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 12 people found this instruction helpful
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the el... read more