Models > AKS3030E (P1142527N E)

AKS3030E (P1142527N E) Amana Cooktop - Overview

Get Parts and Repair Help for AKS3030E

If you know the cooktop repair part you need, you can browse the list of all parts on the AKS3030E, or you can search by name or part description. You can also find your part by where it is located on the AKS3030E by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AKS3030E [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.51

Spark Ignition Electrode

Sold Individually.

$33.39

BURNR-HEAD

$4.60

SCREW

$34.61

Top Burner with Electrode - Medium - 9k

$16.14

Surface Burner Knob

Sold individually. This knob accepts a D-shaped shaft.

$26.43

Burner Cap - Matte Black

The size of this burner cap is actually 2.5" to 2.75 inches in diameter.

$30.69

Burner Cap - 12/13K

$73.30

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$66.97

Top Burner Valve

Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.

$2.70

Bolt - m3x6

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Electrode, no spark

  • Customer: HUY from ALISO VIEJO CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 29 of 36 people found this instruction helpful
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner read more

Burner would not ignite when control in "light" position

  • Customer: Michael from Friendswood TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 12 people found this instruction helpful
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the el... read more

Two of the four burners would not ignite when lighting the stove.

  • Customer: Dave from Livonia MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 9 of 10 people found this instruction helpful
I thought the problem was with the ignitors/burners since they appeared to be worn. As it turned out, I needed the spark ignitor, which is a "brain box" located under the range cover. It connects all of the ignitor/burners and sends current to the ignitors to give it the "spark" to ignite the gas. It was really easy to replace. read more