Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AKS3020L

AKS3020L (P1142517N L) Amana Cooktop - Overview

Get Parts and Repair Help for AKS3020L

If you know the cooktop repair part you need, you can browse the list of all parts on the AKS3020L, or you can search by name or part description. You can also find your part by where it is located on the AKS3020L by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AKS3020L

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$19.12

Spark Ignition Electrode

This spark ignition electrode is just over an inch in length. It comes with a mounting bracket and is used for some gas ranges and ovens.

$14.13

Top Burner Knob - black

This top burner knob is two and a half inches in diameter. It is all black in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium, high, and light positions. This knob also has a gray indicator line. This knob will accept a 'D' shaped shaft, and it is two inches tall.

$56.35

Spark Ignition Module with Bracket

This part comes with the mounting bracket.

$4.90

SCREW

Part might differ in appearance, but functions same as original. Sold individually.

$39.92

Top Burner with Electrode - Medium - 9k

$5.15

Bolt - m3x6

This electrode mounting screw is well under an inch long. It is made entirely of metal and has a Philips head.

$4.63

Screw

$96.70

Surface Burner Head

Sold individually.

$26.78

Burner Cap - 12/13K

$44.55

Spark Switch - 270 Degrees

This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Electrode, no spark

  • Customer: HUY from ALISO VIEJO, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 41 of 50 people found this instruction helpful
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner read more

2 of 4 burners wouldn't light

  • Customer: John from Alexandria, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 24 of 28 people found this instruction helpful
Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one by one, put the sto... read more

Burner would not ignite when control in "light" position

  • Customer: Michael from Friendswood, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 17 people found this instruction helpful
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the el... read more