Models > AKR2000E (P1131574N E)

AKR2000E (P1131574N E) Amana Cooktop - Overview

Get Parts and Repair Help for AKR2000E

If you know the cooktop repair part you need, you can browse the list of all parts on the AKR2000E, or you can search by name or part description. You can also find your part by where it is located on the AKR2000E by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for AKR2000E parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AKR2000E [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.32

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$7.58

Drip Bowl - 6" - Black

Sold individually.This part is located beneath the element and catches any spills.

$2.70

Installation Screw

This screw is sold individually.

$39.73

Surface Infinite Switch

$4.54

SCREW

SCREW

SCREW, #8-32 X 3/8 HEX WSH HD

TOP, MAIN (BLACK)

BUR BOX ET 140 W/A

DISCONTINUED

Common Symptoms of the AKR2000E [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

One burner didn't work all the time the other would go red hot

  • Customer: Phillip from Pekin IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 8 people found this instruction helpful
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves o... read more

Electric burner on stove would not work

  • Customer: Ronald from Fresno CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
The first thing I did was to turn the power off to the stove by turning the Stove circuit breaker off at the Main breaker panel. I next removed the 4 burners by pulling them out of their plug-in blocks. I then removed the four screws that held the top of the stove to the body so I could access the bad plug-in block, the screws were located under each of th... read more

Small burner full hot all the time.

  • Customer: RICHARD from PARADISE TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 9 of 20 people found this instruction helpful
TURNED OFF POWER TO STOVE Removed 5 Knobs, 2 screws that held bad switch.
Removed 4 screws and lifted panel up and forward to expose switches. Adjusted spring tension on knob stem to hold knob ( stem in new switch slightly smaller) removed wire from defective switch one at a time and fastened to new switch in sequence. Reassembled and turned... read more