Models > AKED3050E (P1131760N E)

AKED3050E (P1131760N E) Amana Cooktop - Overview

Get Parts and Repair Help for AKED3050E

If you know the cooktop repair part you need, you can browse the list of all parts on the AKED3050E, or you can search by name or part description. You can also find your part by where it is located on the AKED3050E by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AKED3050E [Viewing 2 of 2]



Sold individually.


Surface Infinite Switch


Variable Fan Speed Control



This screw is sold individually. Size: 8-32 x 1/4 inch.




Modular Plug Block



Common Symptoms of the AKED3050E [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

knob stem broke off switch

  • Customer: TODD from PALOS HEIGHTS IL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 4 of 4 people found this instruction helpful
I had to remove the 18-22 screws that held in the top of the stove. Then remove the nut that held the switch in place. I took a pictures as I went with my camera phone. That way I remembered which wires went where. Since there was a two day lag getting the part, i was afraid that I would forget. Once I received the part, I just reversed the process. Hardest ... read more

Small burner full hot all the time.

  • Customer: RICHARD from PARADISE TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 8 of 18 people found this instruction helpful
TURNED OFF POWER TO STOVE Removed 5 Knobs, 2 screws that held bad switch.
Removed 4 screws and lifted panel up and forward to expose switches. Adjusted spring tension on knob stem to hold knob ( stem in new switch slightly smaller) removed wire from defective switch one at a time and fastened to new switch in sequence. Reassembled and turned... read more

bad control switch for stovetop burner

  • Customer: Thomas from Two Harbors MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Move stove away from wall to allow working on back of stove. Unplug stove. Remove metal cover from top rear of stove. Pull control knob off of control (front of stove) Remove 2 screws holding infinite control in place (front of stove) Replacement control not identical to original control, having more terminal lugs and different physical arrangement. I used t... read more