Models > AKD1 Maytag > Instructions

AKD1 (P8555801S) Amana Cooktop - Instructions

All installation instructions for AKD1 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the AKD1
1-2 of 2
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken prong that knob fit onto

  • Customer: Lisa from Oklahoma City OK
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 3 of 5 people found this instruction helpful
This was a piece of cake! We put off doing this for ourselves because we thought it would be difficult. We sold the house and "had" to do it. Turns out we should have done it for ourselves a long time ago.

THE STEM ON THE BURNER CONTROL SW BROKE OFF

  • Customer: charles from franklin LA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I USED A PHILLIPS SCREWDRIVER TO REMOVE THE CONTROL SWITCH.I DREW A DIAGRAM ON A PIECE PAPER WHERE THE WIRE CONTACTS CONNECTED I WROTE THE DIFFERENT # AND WIRE COLORS DOWN . I COMPARED THE 2 SWITCHES THEY WERE THE SAME.SO I CONNECTED THE WIRES . I PUT THE 2 SCREWS ON. THE STEM WAS HIGHER THAN THE OTHER SWITCHERS.SO I HAD TO CUT THE STEM SHORTER. IT HAD GROVES SO IT WAS EASY TO USE A HACKSAW TO CUT A LITTLE THEN USE A LOCK PLIERS TO HOLD THE STEM AND ANOTHER TO BREAK IT OFF THEN IT FIT PERFECT I PUT THE KNOB ON PRESTO NEW SWITCH.JUST LIKE NEW.
All Instructions for the AKD1
1-2 of 2