Models > AKD1 Maytag

AKD1 (P8555801S) Amana Cooktop - Overview

Get Parts and Repair Help for AKD1

If you know the cooktop repair part you need, you can browse the list of all parts on the AKD1, or you can search by name or part description. You can also find your part by where it is located on the AKD1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$66.25

Burner Control Switch Kit - 8"

Filter Assembly

This filter assembly is just under eleven inches long and is not quite six inches wide. It is a metallic filter and it is used with some downdraft ranges.

TERM-RECP

SWITCH GAS

DISCONTINUED

Modular Plug Block

SCREW

NUT, SCREW

KIT, MOTOR & PLATE

INDICATOR LIGHT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken prong that knob fit onto

  • Customer: Lisa from Oklahoma City OK
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 3 of 5 people found this instruction helpful
This was a piece of cake! We put off doing this for ourselves because we thought it would be difficult. We sold the house and "had" to do it. Turns out we should have done it for ourselves a long time ago. read more

THE STEM ON THE BURNER CONTROL SW BROKE OFF

  • Customer: charles from franklin LA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I USED A PHILLIPS SCREWDRIVER TO REMOVE THE CONTROL SWITCH.I DREW A DIAGRAM ON A PIECE PAPER WHERE THE WIRE CONTACTS CONNECTED I WROTE THE DIFFERENT # AND WIRE COLORS DOWN . I COMPARED THE 2 SWITCHES THEY WERE THE SAME.SO I CONNECTED THE WIRES . I PUT THE 2 SCREWS ON. THE STEM WAS HIGHER THAN THE OTHER SWITCHERS.SO I HAD TO CUT THE STEM SHORTER. IT HAD ... read more