Models > AK2T36W2 (P1131564N W)

AK2T36W2 (P1131564N W) Amana Freezer - Overview

Get Parts and Repair Help for AK2T36W2

If you know the freezer repair part you need, you can browse the list of all parts on the AK2T36W2, or you can search by name or part description. You can also find your part by where it is located on the AK2T36W2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$8.35

USE MCN TJ114

$3.59

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.

$4.46

Electric Hole Cover

This part fits below the surface burner knob and has a center hole just big enough for the knob's shaft.

$95.45

Dual Radiant Element with Limiter

With the dual element you are able to adjust the size of the burner you want to use to match your pots/pans.

$46.62

Surface Burner Infinite Switch

This switch controls the stove top surface burner.

$78.16

ELMNT-SURF

Infinite Switch Knob

This infinite switch knob is two inches in diameter. It is white in color and it is made entirely of plastic. There is gray lettering denoting the varying degrees of temperature.

Surface Burner Control Switch

This dual surface burner infinite control switch is just under three inches long. Using 240 volts, this switch will operate at 15 amps.

SWITCH GAS

KNOB, DUAL INFIN SW (WHITE)

Common Symptoms of the AK2T36W2 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Outer Heater ring not working on dual burner.

  • Customer: Mark from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 14 of 16 people found this instruction helpful
Turned off power to unit.
Tilted up Glass top and removed two screws holding rear hinges to range. Then I unplugged wire harness from lower range and placed the Glass top facing down on counter top with towel for cushion. Removed 1 screw holding center of burner to support frame, two alignment screws on perimeter, and two screws holding support frame t... read more

The infinite switch controlling one of the range top burners failed.

  • Customer: erik from chester springs PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 14 people found this instruction helpful
1 - Turned off electricity to the cook top.
2 - Removed the range top from the cutout in the counter.
3 - Removed the smooth top by removing the screws around the perimiter of the smooth top.
4 - Removed the screws securing the corner closest to the dead switch.
5 - Removed the screws holding the channel, onto which the infinite switched ... read more

Baked on sauce

  • Customer: Julie from Newnan GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 8 of 10 people found this instruction helpful
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce. read more