Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AK2T36E1

AK2T36E1 (P1131558N) Amana Cooktop - Overview

Get Parts and Repair Help for AK2T36E1

If you know the cooktop repair part you need, you can browse the list of all parts on the AK2T36E1, or you can search by name or part description. You can also find your part by where it is located on the AK2T36E1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AK2T36E1

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.35

CLEANER

Order within the next 4 hrs and your part ships today!
$4.93

Electric Hole Cover

This hole cover is almost two inches in diameter. It fits below the surface burner knob of some ranges, and has a center hole just big enough for the knob's shaft.

Order within the next 4 hrs and your part ships today!
$4.90

SCREW

Order within the next 4 hrs and your part ships today!
$58.33

Surface Burner Infinite Switch

This surface burner infinite control switch is used for some ranges. It is a black and a metallic switch that is almost three inches long.

Order within the next 4 hrs and your part ships today!
$3.57

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

Order within the next 4 hrs and your part ships today!
$4.90

SCREW

Order within the next 4 hrs and your part ships today!

Dual Infinite Switch Knob

$29.87

Infinite Switch Knob - black

This infinite switch knob is just over two inches in diameter. It is all black in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium low, medium, medium high, and high positions. This knob is just over an inch tall.

Order within the next 4 hrs and your part ships today!

Surface Burner Control Switch

This dual surface burner infinite control switch is just under three inches long. Using 240 volts, this switch will operate at 15 amps.

SWITCH GAS

Common Symptoms of the AK2T36E1

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Baked on sauce

  • Customer: Julie from Newnan, GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 10 of 14 people found this instruction helpful
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce. read more

The infinite switch controlling one of the range top burners failed.

  • Customer: erik from chester springs, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 15 people found this instruction helpful
1 - Turned off electricity to the cook top.
2 - Removed the range top from the cutout in the counter.
3 - Removed the smooth top by removing the screws around the perimiter of the smooth top.
4 - Removed the screws securing the corner closest to the dead switch.
5 - Removed the screws holding the channel, onto which the infinite switched ... read more

cook top was broke

  • Customer: Ed from Bellefontaine, OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 6 of 10 people found this instruction helpful
we removed the old cook top sixteen screws and four bolts was removed put the new top back on and put all the screws and bolts back in job done read more