Models > AK2T30W

AK2T30W Amana - Overview

Models starting with AK2T30W

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Cooktop Cleaner – Part Number: TJ114
Cooktop Cleaner
PartSelect #: PS2344170
Manufacturer #: TJ114
Cleans/Polishes all glass, ceramic, porcelain and fiberglass surfaces.
  No Longer Available
Electric Hole Cover – Part Number: WPY0307427
Electric Hole Cover
PartSelect #: PS11757450
Manufacturer #: WPY0307427
This hole cover is almost two inches in diameter. It fits below the surface burner knob of some ranges, and has a center hole just big enough for the knob's shaft.
  No Longer Available
Appliance Scraper – Part Number: WA906B
Appliance Scraper
PartSelect #: PS408570
Manufacturer #: WA906B
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
$10.81
  In Stock
Installation Screw – Part Number: WP3400882
Installation Screw
★★★★★
★★★★★
(2)
PartSelect #: PS11741612
Manufacturer #: WP3400882
This screw is sold individually.
$8.06
  In Stock
Control Knob – Part Number: WP307620W
Control Knob
PartSelect #: PS11740688
Manufacturer #: WP307620W
This control knob is just over two inches in diameter. It is white and made of plastic. There is gray lettering on this knob to denote the different degrees of temperature.
  No Longer Available
Radiant Surface Burner Element 1500W – Part Number: W10823699
Radiant Surface Burner Element 1500W
★★★★★
★★★★★
(3)
PartSelect #: PS11764909
Manufacturer #: W10823699
This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OE...
$106.92
  In Stock
Surface Infinite Switch – Part Number: WP74011243
Surface Infinite Switch
★★★★★
★★★★★
(3)
PartSelect #: PS11744436
Manufacturer #: WP74011243
$121.87
  In Stock
Infinite Switch – Part Number: W11121639
Infinite Switch
PartSelect #: PS12347313
Manufacturer #: W11121639
$80.45
  In Stock
Infinite Switch Knob - black – Part Number: WP31760601B
Infinite Switch Knob - black
PartSelect #: PS11740815
Manufacturer #: WP31760601B
This infinite switch knob is just over two inches in diameter. It is all black in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium low, medium, medium hig...
  No Longer Available
Dual Radiant Element with Limiter – Part Number: W10823726
Dual Radiant Element with Limiter
★★★★★
★★★★★
(1)
PartSelect #: PS11764926
Manufacturer #: W10823726
With the dual element you are able to adjust the size of the burner you want to use to match your pots/pans.
$212.39
  In Stock
Dual Element Infinite Control Switch – Part Number: 12002422
Dual Element Infinite Control Switch
★★★★★
★★★★★
(1)
PartSelect #: PS2003805
Manufacturer #: 12002422
$119.87
  In Stock
Screw – Part Number: WP488234
Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
$9.15
  Special Order
View More
Back to Top

Common Symptoms of models starting with AK2T30W

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Outer Heater ring not working on dual burner.
Turned off power to unit.
Tilted up Glass top and removed two screws holding rear hinges to range. Then I unplugged wire harness from lower range and placed the Glass top facing down on counter top with towel for cushion. Removed 1 screw holding center of burner to support frame, two alignment screws on perimeter, and two screws holding support frame to glass top. This allowed me to slide out the old element with all wiring connections intact.
Placed the new assembly in same location under support frame, noting numbered positions of two alignment screws from old unit. This is necessary to properly align heater to surface glass. Replaced all screws connecting burner to frame. Then I removed each wire one-by-one from old unit, reconnecting to same location on new unit.

Replaced top in reverse order from removal. Powered on the circuit breaker and verified proper operation of dual unit with large/small selecttor switch. Total time to repair about 30 minutes.
Read less
Parts Used:
Dual Radiant Element with Limiter
  • Mark from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
23 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner switch failed (full on, even in "lo")
Managed to reach down from the top, unscrew the old part, so I could remove from under the cooktop. Easy to trace the wires, and map them to the (slightly different) replacement. Works like a charm, and new part appears to be of higher quality than the old one.
Parts Used:
Dual Element Infinite Control Switch
  • Stephen from Seneca, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
21 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Letters worn off from knobs
Our Amana stove top letters had worn off the knobs. We bought new knobs a few years ago and the same thing happened. This time we bought new knobs and coated the lettering with 5-minute epoxy to preserve the lettering.
Parts Used:
Control Knob
  • Joseph from Laurel, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top