Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AJHS10DCBM1

AJHS10DCBM1 General Electric Air Conditioner - Overview

Get Parts and Repair Help for AJHS10DCBM1

If you know the air conditioner repair part you need, you can browse the list of all parts on the AJHS10DCBM1, or you can search by name or part description. You can also find your part by where it is located on the AJHS10DCBM1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Control Knob

This is a control knob. You may also know it as a room air rotary switch control and it is used in conjunction with your air conditioner. The function of this part is to allow you ...


Air Filter

This air filter is beige in color and measures 19 inches wide by 10 inches high. This part is found in room air conditioners. This part is sold individually. The filter catches any airborne dirt and dust particles from entering your home. This part may break or clog over time and will need to be replaced or cleaned. It is important to keep the filter free of build up or damage to ensure that your appliance is working as efficiently as possible. You will find the filter behind the grill located on the front of your unit. This is a genuine part that is sourced right from the manufacturer.








Heater Protector

Also known as High-Limit Thermostat.


Centrifugal Fan Wheel

Also known as Blower Wheel.







Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

air filter rotted.

  • Customer: Michael from Bethlehem, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 13 of 20 people found this instruction helpful
I replaced it with a new one. read more

Power Cord Replacement

  • Customer: David from San Jose, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 5 of 6 people found this instruction helpful
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on terminals. These are hard... read more

Outside fan motor w/n run

  • Customer: Rick from Felton, DE
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 1 of 2 people found this instruction helpful
Removed the two screws that held the control board in place. Carfully pulled wires off plugs and pluged them on the new board in the same location. Put the two screws back in to secure the control board. Reassembled plastic cover and pluged in unit. read more