Models > AJES12DCM1 > Instructions

AJES12DCM1 General Electric Air Conditioner - Instructions

All installation instructions for AJES12DCM1 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the air conditioner repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the AJES12DCM1
1-3 of 3
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

vibration, one fan blade broken off

  • Customer: HERBERT from WOODCLIFF LAKE NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 7 of 7 people found this instruction helpful
Removed A/C unit from wall, removed 8 screws that held fan motor in place, removed 8 screws that held fan shroud in place, removed fan blade nut and pulled fan blade unit from motor shaft. Reversed steps to install.

Power Cord Replacement

  • Customer: David from San Jose CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 4 people found this instruction helpful
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on terminals. These are harder to get off and on since there are many and are in a tight space. May want to use some long needle nose pliers to assist. The new cable was attaced. There are two plastic clamps that help screw the cord to the unit. Only porblem was the new cord plugs in upside down so you will need to turn the outlet plug around. Turn off power, unscrew outlet and turn upside down. return power to outlet and plug in to complete.

blade broken

  • Customer: Nelson from Jersey City NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 4 of 6 people found this instruction helpful
order a new fan blade and replaced it
All Instructions for the AJES12DCM1
1-3 of 3