Models > AJES10DCM1

AJES10DCM1 General Electric Air Conditioner - Overview

Get Parts and Repair Help for AJES10DCM1

If you know the air conditioner repair part you need, you can browse the list of all parts on the AJES10DCM1, or you can search by name or part description. You can also find your part by where it is located on the AJES10DCM1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your air conditioner. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AJES10DCM1 [Viewing 3 of 3]

$21.00

Control Knob with Clip

This knob accepts a D-shaped shaft.

$52.09

Fan Blade

$20.45

Air Filter

$34.18

PROTECTOR

$5.30

FUSE

$3.84

Special Nut

$91.39

POWER CORD

$8.46

Motor Cushion

Sold individually. This part works in conjunction with the fan motor.

$57.66

Repl Room Front (Rounded

$53.82

Main Switch Assembly

Common Symptoms of the AJES10DCM1 [Viewing 1 of 20]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

vibration, one fan blade broken off

  • Customer: HERBERT from WOODCLIFF LAKE NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 7 of 7 people found this instruction helpful
Removed A/C unit from wall, removed 8 screws that held fan motor in place, removed 8 screws that held fan shroud in place, removed fan blade nut and pulled fan blade unit from motor shaft. Reversed steps to install. read more

Power Cord Replacement

  • Customer: David from San Jose CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 4 people found this instruction helpful
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on terminals. These are hard... read more

blade broken

  • Customer: Nelson from Jersey City NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 4 of 6 people found this instruction helpful
order a new fan blade and replaced it read more