Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AJEH12DCBM1

AJEH12DCBM1 General Electric Air Conditioner - Overview

Get Parts and Repair Help for AJEH12DCBM1

If you know the air conditioner repair part you need, you can browse the list of all parts on the AJEH12DCBM1, or you can search by name or part description. You can also find your part by where it is located on the AJEH12DCBM1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Air Filter

This air filter is beige in color and measures 19 inches wide by 10 inches high. This part is found in room air conditioners. This part is sold individually. The filter catches any...


Control Knob

This is a control knob. You may also know it as a room air rotary switch control and it is used in conjunction with your air conditioner. The function of this part is to allow you to turn the rotary switch in order to select the different fan cooling modes. For this repair, you will not require any tools. To change this part all you will have to do is grip the knob firmly and give it a quick pull. This should eject the knob from the rotary switch. When you have received your new part, it will snap back in place. This part is beige and has an outer diameter of almost 1.5 inches.




Heater Protector

Also known as High-Limit Thermostat.




Special Nut


Control Board







Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

air filter rotted.

  • Customer: Michael from Bethlehem, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 13 of 19 people found this instruction helpful
I replaced it with a new one. read more

Power Cord Replacement

  • Customer: David from San Jose, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 5 of 6 people found this instruction helpful
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on terminals. These are hard... read more

broken condenser fan

  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
remove platsic cover from unit after taking the unit out of the wall and replaced the blade, re-install the covers and done!!! read more