Models > AH151W

AH151W Jenn-Air Refrigerator - Overview

Get Parts and Repair Help for AH151W

If you know the refrigerator repair part you need, you can browse the list of all parts on the AH151W, or you can search by name or part description. You can also find your part by where it is located on the AH151W by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Exact Part matches for your search term [Viewing 1 of 1]

White Halogen Element Cartridge - with glass-ceramic surface

This part number matches the current model number "AH151W".

Manufacturer's Number: AH151W Haloring halogen element with glass-ceramic surface for all Expressions Collection Jenn-Air cooktops. Side plug-in cartridge, also available in black. Works with the following models: C1200 | C1400 | C2000 | C2200 | C2400 | C3200 | C3400 | CR2200 | CVEX4100 | CVEX4270 | CVEX4370 | May not be exactly as shown.

Sections of the AH151W [Viewing 1 of 1]

$3.76

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

$4.46

SCREW

$23.12

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$63.63

Radiant Surface Element with Limiter - 6" - 1200W

$4.60

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

$3.82

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$150.86

Halogen Surface Element with Limiter - 8"

$4.60

SCREW

$3.82

BRACKET

GUIDE, QUICK REF - JENN-AIR

Common Symptoms of the AH151W [Viewing 1 of 168]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

6" burner on the radiant surface started smoking and burned out.

  • Customer: Johnny from Henderson NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 14 of 21 people found this instruction helpful
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in ... read more

The top would not heat,large or small eye.

  • Customer: Calvin from Merced CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 11 of 18 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

one side of cooktop did not work

  • Customer: Rebecca from Broadway NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 5 people found this instruction helpful
I took out the side of the cooktop that did not work. I had to take off the bottom of the cooktop and checked where electricity was going and not going. Once I found the part that needed replacing, I went on the website, search for Jen-Air cooktops and model number. From the sketch on the website, I was able to order the part needed. I decided to get 2 in or... read more