Models > AGR5844VDD5

AGR5844VDD5 Whirlpool Range - Overview

Get Parts and Repair Help for AGR5844VDD5

If you know the range repair part you need, you can browse the list of all parts on the AGR5844VDD5, or you can search by name or part description. You can also find your part by where it is located on the AGR5844VDD5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for AGR5844VDD5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$2.70

Screw

This screw is sold individually.

$37.24

Bake Igniter

$2.70

Igniter Screw

This screw is sold individually.

$66.29

Sensor

This temperature sensor detects the temperature within the oven cavity.

$18.07

2 Piece Broiler Pan

$4.65

Touch-Up Paint - White

$3.96

Rear Leveling Leg

Sold individually.

$27.57

Bottom Door Trim

Trim only in white. Screws not included.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bake/broil would not work

  • Customer: Greg from North Baltimore OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 40 of 62 people found this instruction helpful
Replaced igniter and also DSI/direct spark igniter did not fix problem. Called out repairman turned out to be bad gas valve. Replaced that part , now stove works fine. read more

temperature not accurate after 3 1/2 years of happy usage

  • Customer: Ruth from Oregon IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 49 of 101 people found this instruction helpful
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I tur... read more

Replace shattered outer door glass

  • Customer: Philip from Vandalia MI
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 22 of 29 people found this instruction helpful
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass against the trim piece... read more