Models > AGQ8000CFE0 > Parts

AGQ8000CFE0 Frigidaire Dryer - Parts

All parts for the Frigidaire Dryer AGQ8000CFE0

Below is a list of all parts for the Frigidaire Dryer AGQ8000CFE0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AGQ8000CFE0
1-14 of 115
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Rear Drum Bearing Kit

This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant and installation screws.


Drum Belt

This 87-3/4" long dryer drum belt goes around the dryer drum and the pulley to rotate the drum once motor is activated.


Drum Glide - White

Appliance requires 2 .Sold individually.


Drum Support Bearing

This part attaches onto the inside of the rear panel of the cabinet.


Lower Front Felt Seal with Adhesive


'M' Series Ignition Coil Kit

This ignition coil kit contains two coils. One is a two wire secondary coil, while the other is a three wire booster coil. Both should be used together in your gas clothes dryer.


Lint Filter

This white dryer lint filter screen collects lint as it passes through the dryer vent.


Blower Housing with Blower Wheel


Door Strike

"Male" piece of a dryer door closing mechanism.


Bearing Bracket

This part mounts on the inside of the rear cabinet.


Upper Front Felt Seal


Ball Hitch

You can get this part in a kit also.


Idler Arm Assembly

Part may differ in color from image. Please note that this is only a cosmetic difference.


Drive Motor with Pulley

This motor has a double shaft.

All Parts for the AGQ8000CFE0
1-14 of 115