Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AGDS902WW (P1131831NWW)

AGDS902WW (P1131831NWW) Amana Range - Overview

Get Parts and Repair Help for AGDS902WW

If you know the range repair part you need, you can browse the list of all parts on the AGDS902WW, or you can search by name or part description. You can also find your part by where it is located on the AGDS902WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for AGDS902WW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$46.04

Flat Style Oven Igniter

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

$21.46

2 Piece Broiler Pan

The top of this part is now black.

$56.78

Spark Ignition Module with Bracket

This part comes with the mounting bracket.

$2.80

SCREW

Sold individually.

$33.42

Hinge Kit - Right Side

This hinge is located on the right side of the door.

$33.17

Hinge Kit - Left Side

$57.22

Door Gasket

Set Button Knob - White

Sold individually.

$25.33

Leveling Leg

Sold Individually.

Spark Switch

This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.

  • Customer: John from Niles, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 57 of 61 people found this instruction helpful
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them ... read more

Broken Electrode, no spark

  • Customer: HUY from ALISO VIEJO, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 39 of 47 people found this instruction helpful
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner read more

Getting F 1 and 2 error codes and the oven turned itself off.

  • Customer: Suzanne from Acton, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 64 of 124 people found this instruction helpful
Really easy but in this model there are 2 versions of the sensor, male and female. The website didn't have any place to see that. So the first sensor that came was male but we needed the other. After calling they sent me a return form and sent the new part (which was actually much cheaper) overnight and it went in very quickly. Would check this out again wh... read more