AFI2538AES12 Amana Refrigerator - Instructions

I used the feedback information from others who commented on your website

Opened up the compartment where the old filter was located, twisted it to take it out (be careful not to spill water in the filter!), and installed the new one. Even a 64 year old woman had no trouble!

replaced electric control board, defrost for six hours. next day (24 hours) same problem, dusterhoff2928@charter.net

Similar to other reports. Only thing I can add is the nut driver is 1/4" and it is all I needed to remove and replace all five screws.

Replaced the center rail

After years of using a flash light to check the contents of my refrigerator, I decided to try to fix the problem myself. Replacing the light switch was very easy. The directions were straight forward and I'm sorry I waited so long to tackle the problem.

This is the second order we have placed from Partselect. It arrived within two days as promised. The repair took about ten minutes and consisted of removing the deli drawer, removing the broken end cap, removing the slide rail from the end cap, cleaning out the area with a sponge, attaching the slide rail to the new end cap and installing the new end cap. The deli drawer easily slides onto the rails and the deli door easilt locks into place within the side rails. We were unable to locate the part locally and from now on, Partselect will be the first place we look for an appliance replacement part.

Took out 2nd new filter $43.00 each that clogged in less than 2 weeks each and installed in 2 mins. this bypass and ice and waterr work perfect.Thank you, thank you for your exceptional service ordered part and it came next day without extra charge,great service.

I took out the two shelves that were in the way. Lifted the glass out and set it aside. Since the pantry drawer cover wasn't in, because the tab was broke, I lifted the support beam out, pulled out the drawer and lifted it out. (The pantry drawer just lifts right out, straight up then towards you) I took out the back support beam, it lifts straight up. After that, I used a screw driver to take the pantry drawer glider (part #12) off of the broken one, then I put it on the new one so I wouldn't forget its orientation to the new part. I used a my socket set to take out two (should be three, but mine had two) bolts. I then gently pulled off the part needing replaced, first pulling it to the left, bringing the SLIDE- TEM (part #11) the BAR- TEMP (part #15) with it. Part #11 is held in by a tab at the back, to the left, so when you have the whole thing at the correct angle, it just slides out. (Pulling to the right, when you have the whole piece angled towards the center of the fridge, to the left.) After you get that piece out, you'll be able to clean the bottom of the fridge, it's amazing how much crap builds up on the bottom! (I even found a dead fly, eww! LOL) Taking parts #11 & #15 off of your old piece is easy, two tabs that you bend in on the right side of part #11 loosens it from your old part, then twisting it to take the pieces apart then lifting a few tabs to get #15 off of the old part. Then twisting it again to get the KNOB-TEMP (part #14) off. Pay attention to how you take this apart! It goes back together just like it came off! Attach these pieces to your new piece then it slides right in like you took it out. Slide the back left of #11 into the tab, reinsert the bolts, put your support bars back in, put your drawer in, put the drawer cover back into the new tab you just installed, put your glass in and finally, your shelves. All done!

I took the item from the box and snapped it in...12 sec. job.. what I did like is that I ordered the part,in 5 minutes and recieved the part in 3 days...great !!!! and thank you

Just replaced the old Push-On Start Relay and it started to work again.

Just replaced a water/ice filter..

removed the two drawers. due to the refigerator location, had to remove the door. Then it was just 3 screws and put in the new end cap and then replace drawers and door. Job is done in less than 20 min and the wife is happy again.

My repair was so easy it doesn't need to be posted. However I will take this opportunity to relay how easy the website is to navigate. The shipping is remarkably fast. Look no further. Part Select is the one to bookmark!

Very easy to replace the old broken piece with the new one. Simple