Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AFD2535DES > Parts

AFD2535DES Amana Refrigerator - Parts

All parts for the Amana Refrigerator AFD2535DES

Below is a list of all parts for the Amana Refrigerator AFD2535DES - Bottom Freezer. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AFD2535DES
15-28 of 222
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$103.25

Crisper Frame

Glass NOT included. If you are looking for the center rail see related parts below.

$4.87

Screw

Sold individually.

$32.75

Door Bin

Sold individually.

$30.23

Fan Blade

Used with Evaporator Fan Motors.

$19.63

Light Switch - 2 Terminal

The light switch terminal is used in refrigerators and freezers to help you see inside your appliance by turning on when the fridge door is open and turning off when the door is cl...

$32.03

Thermistor

Long harness thermistor kit.

$94.85

Vertical Mullion Rail - Black

$83.75

Crisper Glass Shelf Insert

Frame not included.

$4.89

Pivot Block

$25.52

Icemaker Shut-Off Arm

The icemaker shut off arm, used in a refrigerator, gives the icemaker a signal to stop making ice once the bin has a reached a certain limit. This helps monitor ice production. If your icemaker is not making ice properly or consistently, replacing this part could be a solution to your problem. The tools required for this installation are a 1/4 inch nut driver, a Phillips screwdriver, and needle nose pliers. Refer to the manual guide provided by the manufacturer for further guidance and instructions. Remember to safely store food when the refrigerator power is off to keep it from deteriorating.

$16.54

Butterfly Handle Mount

This mount is used to connect the handle and trim together. Sold individually.

$38.79

Defrost Thermostat

This defrost thermostat is a temperature sensing mechanism used in freezers and refrigerators. The thermostat senses the rise in evaporator temperature during a defrost cycle and turns the defrost heater off once frost is melted from the coils. If the freezer is not defrosting, or the freezer section is too warm, it is best to replace the thermostat to fix the problem. The tools needed for this project are: 1/4 inch nut driver, flat blade screwdriver, needle nose pliers, wire strippers, and pair of wire nuts. Remember to unplug your appliance from the power source for safety and refer to the manual provided by the manufacturer for installation instructions.

$17.88

Water Fill Cup and Bearing

This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ic...

$264.95

Electronic Control Board

The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem. The tools needed for this installation project is a small flat blade screwdriver. *Please note: the board will need to be programmed after installation. Remember to unplug refrigerator from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.

All Parts for the AFD2535DES
15-28 of 222