AER1110BAH Admiral Range - Instructions

1. turned off the breaker delivering power to the oven. 2. removed the grates. 3. unscrewed the 2 screws holding the element in place and gently pulled the2 ends of the element from the rear of the oven. 4. disconnected the 2 power connections from the element being careful not to have them slip back into the insulation at the rear of the oven. 5 removed the element and connected the new element to the power sources - this was the most difficult task, with little wire extending from the back of the oven it required delicate handling and certainty that the connection was solid. 6. slid the 2 prongs of the element into the rear of the oven. 7. installed the 2 screws. 8. replaced the grates.

Just dropped in

Removed heating element, installed new drip pan, replaced heating element. Was amazed at fast delivery - ordered in afternoon, arrived fed ex next morning!

Watched the accompanying video on the website. Very glad I did as the key thing to remember when replaceing the bake element is that the connecting wires ARE VERY SHORT and can easily snap back inside the element lead hole in the back of the oven. Lead on the left side had a small amount of play but the right side element wire was extremely short and "snapped" back into the hole. I had to use needle nose pliers to pull it back through. Just take your time and keep your fingers on the leads as best you can.

The bake element repair itself was very easy and straightforward. The difficulty and extra time involved relates to improper wiring of the electrical circuit the range plugged into. A previous homeowner had apparently taken a shortcut when repairing a faulty di-pole circuit breaker and routed one side of the 240v circuit through a separate single-pole breaker which is a blatant electrical code violation. After replacing the faulty di-pole breaker and wiring the circuit properly the bake element repair was simple and the oven is working great. While most DIY folks will not run into this same problem with an improperly wired electrical circuit it pays to be cautious. I relied on the di-pole breaker to cut power to the oven during the repair but because one side of the circuit had been rerouted I received a nasty shock. Please do what I failed to do originally: unplug the range/oven at the wall before making the repair. And if you suspect improper wiring of the 240v circuit, please consult an electrician as it is a dangerous situation.

I called my son, left the part, two screw drivers out, went to work, came home and was able to use my oven again! It couldn't have been easier and I made him some zucchine cake as a thank you for doing the job! It was easy to order and pay for the part online, get the part within a week and I was back in business. Thanks for being available to make getting the part a no-hassle experience.

New receptacle element. I am a girl and I did it.!!!!

Was easy cut the wires of as told to do wire nut the ends together and put back together and tested and worked great. Done

I followed the instructions given on your great site. Thank you so much.

Disassembled upper unit with Phillips screwdriver. Removed 2 "plug connectors" from element switch. Replaced switch. Plugged both connectors back onto switch. Reassembled the upper portion of the range. Tested and OK

My husband did it within minutes. Very easy.

Remove heating element coils. & old drip pans. Install the new drip pans and reinsert the heating elements and insure all elements were level. For aesthetic reasons I replaced all the drip pans - 2 x 8" & 2 x 6".

I took the burner out of the box and snapped it into the slots on the stove, turned on the stove and made dinner! By the way, I received it in 2 days, which was great. I will recommend your company to others and purchase all of my appliance replacement parts from Parts Select. The Norton Service Guarantee was awesome!! Thank you.

Our heating element ended up breaking from age and use. The repair was extremely easy: turn off breaker to oven, unscrew two screws holding in the heating element, pull it from the unit and detach the element from the electrical wiring. Once this is completed just perform the steps in reverse. The part arrived very quickly from PartSelect, arriving in just 2 days with the standard shipping. I am very pleased with my interaction with PartSelect.

Turn off power source before beginning.Unscrew the bracket attached to the back of the oven,carefully pull the heating element forward, exposing the connecting wires. Push any insulation back into wall while holding wires securely.Remove connection with needle nose pliers.Pull wires in wall from each side as far out as possible.Connect heating element to each wire carefully push back element lining up with holes in back of the oven. Attach screws snuggly and you're ready to use.