ADW662EAB Amana Dishwasher - Instructions

The Whirlpool page had a link to a YouTube step by step instruction with pictures. The dish rack stop was very non intuitive - without the YouYube, it would have been impossible

Eventually the Pump started making a lot of noise.
Replaced float switch, (Tells the pump to shut off when empty) initial problem fixed.
Pump running dry caused upper pump housing failure, replaced pump housing, no more noise.

First, I went to the "partselect" web site and searched for "loud noise". The web site listed the probable cause and had a video about how to remove the discharge pump housing. I removed the housing and found it in two pices. Ordered the part and received it in 2 days. I had to watch the video again to make sure I replaced the parts in the correct order. Wife is now happy and that makes me happy. Thanks to "partselect" for your help.

out with the old in with the new

Watched video you have on the site.... also read the first person's description - both very helpful...since I am 75 y.o.and a woman got my chair to sit and did exactly step by step and actually did it! So happy I wouldnt have to buy a new dishwasher YET - Emailed my friends and said if and when they need wheel replaced I can do for them!!! Thanks for all the help on site.

followed your video awesome site thanks

Replaced the inner door foam insulation strip and door gasket.I believe the "secret" is not to push the door gasket in all the way. Let the door find its own seat. Problem fixed.

This was as simple a repair as you will ever get, at least on a 16 year old Maytag like we have. Literally just take the old gasket out and put the new one in -- just make sure to look at the old gasket to ensure you are inserting the proper end of the new one into the channel, I almost put it in wrong, but then again I'm brain damaged where home repairs are concerned. The door is more difficult to close after I put the gasket in, so I may have to adjust the door closing mechanism just a tad.

Great instructions, great service. But I have not yet made the repair.

plastic form inside dishwasher does not press into foam insulation strip hard enough to stop water from leaking. It is still leaking

Installing the door gasket is relatively easy, it just pushes in place without any adhesive. Just make sure it is even on both sides
You can to pull it out and reinstall to even it all way around the door if needed.
You may also find a new gasket will make to door a little harder to close. I presume it will be easier to close over time.
I also installed a new float at the same time but that repair is very difficult, takes specialized tools and lots of patience.

Took apart per video on Part Select found broken piece. Ordered new part and replaced 4 days later.

replaced basket with a new one, so easy even a cave man could do it.....i think.......

look the instrution on line and it worked great.

I put the new one in and that was all