Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ADE7005AKW > Parts

ADE7005AKW Admiral Dryer - Parts

All parts for the Admiral Dryer ADE7005AKW

Below is a list of all parts for the Admiral Dryer ADE7005AKW - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ADE7005AKW
1-14 of 97
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Multi Rib Belt - 93-3/8"

At 93-3/8" inches in length, this dryer drum belt from Amana has five ridges. It is all black in color and is made entirely of rubber. A flat belt, it is 3/8 of an inch wide.


Drum Support Roller - for square ported models

This single drum support roller is used for square ported model clothes dryers. It has a metallic bearing in its center.


Drum Glide

This drum glide is sold individually. ***Please Note: these should be replaced in pairs.


Lint Filter

Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.


High Limit Thermal Fuse

Meant as a backup to a high limit thermostat, this fuse is typically set to trip at a higher temperature than that of a high limit thermostat. This is a one-time use fuse, so when ...


Idler Lever

The spring for this part is sold separately.


Washer, Thrust

This washer is 3/4 inches in diameter.


Cylinder Felt Seal

This part is located between the back of the drum and the rear dryer panel.


Door Catch Kit

This kit comes in two pieces: the catch and the clip.


Heating Element (Orange Dot)

This orange dot heating element replaces those elements with an orange dot on the element flange. It carries 240 volts.


Door Switch Kit

This part replaces older two terminal switches.


Single Drum Glide Felt Pad

This dryer drum glide pad is an inch long. It is made of a felt material and is used for gas and electric clothes dryers.


Cylinder Glide Bracket

These brackets support each side of the tub. Order quantity needed.


Limit Thermostat

This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 225 degrees Fahrenheit. The element will kick back in when the temperature drops to 185 degrees Fahrenheit - the differential of 40 degrees.

All Parts for the ADE7005AKW
1-14 of 97