Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ADE26K3W > Parts

ADE26K3W Admiral Dryer - Parts

All parts for the Admiral Dryer ADE26K3W

Below is a list of all parts for the Admiral Dryer ADE26K3W - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ADE26K3W
1-14 of 133
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.35

Multi Rib Belt - 92-1/4"

This dryer drum belt has four ridges, three grooves and is 1/4" wide.

$15.35

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$16.13

Rear Drum Support Roller

This rear drum support roller is about three inches wide and comes with a bearing. Use it for your gas or electric clothes dryer.

$5.15

Screw

This screw is sold individually.

$50.89

Rear Drum Support Roller Kit

Included in this rear drum support roller kit are 4 screws, 1 spacers, 2 washers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts. *** Note: Per manufacturer this kit has been updated now to have one spacer that is the thickness of 2 spacers. To get these parts separately, please search by model#.

$7.33

Blower Wheel Clamp

This blower wheel clamp is less than an inch long and is used for some clothes dryers to hold the blower wheel firmly in place. This green clamp is made of metal.

$7.01

Screw

This screw is sold individually.

$20.32

Thermal Fuse

$10.89

Drum Glide and Cushion Kit

Pad has adhesive backing.

$4.89

Screw

Sold individually.

$33.56

Door Seal

If this part appears to be too wide for your particular appliance, per the manufacturer, all you have to do is pull it apart.

$17.27

Door Switch

This dryer door switch contains three metal terminals. It is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

$44.97

High Limit Thermostat (Limit: 258-80)

This high limit/safety thermostat is used on many gas and electric clothes dryers. It is made of metal, and is almost two inches long. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 258 degrees Fahrenheit. The element will kick back in when the temperature drops to 178 degrees Fahrenheit.

All Parts for the ADE26K3W
1-14 of 133