Models > ADE20N3V > Parts

ADE20N3V Admiral Dryer - Parts

All parts for the Admiral Dryer ADE20N3V

Below is a list of all parts for the Admiral Dryer ADE20N3V - Residential ADMIRAL LAUNDRY. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ADE20N3V
15-28 of 133
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$24.09

Motor Pulley

$4.46

Retaining Ring

This part works in conjunction with the blower wheel.

$14.23

Door Switch

This dryer door switch contains three metal terminals. It is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

$30.16

Front Drum Support Roller Replacement Kit

This front drum support roller kit is used for many gas and electric clothes dryers. Included in this kit are one right side glide, one left side glide, two adhesive felt pads, a metallic cylinder support brace, and an instructions sheet. Each of the glides are blue in color and are made of a hard plastic. The cylinder support brace is the longest piece in this kit measuring nine inches.

$36.59

Blower Wheel - B/10 Models

This blower wheel is suitable for some clothes dryers of the 10 and earlier series. Manufactured to fit a 1/2 inch motor shaft, this blower wheel is 3-1/8 inches deep. The diameter...

$31.20

Door Seal

If this part appears to be too wide for your particular appliance, per the manufacturer, all you have to do is pull it apart.

$4.46

Timer Resistor Assembly

This timer resistor assembly is made of ceramic and metal.

$38.56

High Limit Thermostat - Limit: 258-80

With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 258 degrees Fahrenheit. The element will kick back in when the temperature drops to 178 degrees Fahrenheit.

$35.73

Control Thermostat

L146-25F 240 Volt internal heater. This thermostat helps to regulate the dryer's internal temperature.

$22.27

Rear Drum Support Roller

Sold individually.

$25.25

Blower Wheel

This blower wheel is manufactured to fit a 1/2 inch motor shaft.

$5.55

Screw

This screw is sold individually.

$14.43

Idler Pulley Wheel

$17.23

Selector Knob

This knob accepts a D-shaped shaft.

All Parts for the ADE20N3V
15-28 of 133