ADB2500AWQ Amana Dishwasher - Instructions

also had to replace heating element. Had to remove dishwasher from under counter to get to heat element. Initial installer used long braided steel water line and plug in electrical connection so removal was easy (10 min). Pulled (2) electrical terminals from heat element and (2) plastic retaining nuts put in new element w/matching nuts,element came w/seals. Check for leaks before installing back under counter. Then removed torx screws holding impeller cover and accumulator/filter removed old put in new after good cleaning of course. All is well.

This was so easy. Just loaded up a torx bit in my drill, unscrewed the 8-10 screws on the door and lowered the front. Latch assembly literally fell out. Screwed up my courage and took a pair of pliers to the electrical connections, pulled them off and hooked them up to new unit one at a time (I confuse easily thus ending source of confusion) and set latch in it's place. Replaced the door front screws and was done. Piece of cake and the directions on your site were very helpful.

unscrew door and replace door handle.
5 to 10 minute job

I watched your video on how to install the part. The actual job went as smoothly as shown. Saved a large repairman's fee. Thanx!

Replase door lach Thang you for the fast respons Peter Hansen

Removed the inside door panel. Removed old, broken latch. Disconnected the two wire plugs. Connected the wire plugs to the new latch. Installed new latch into door. Replaced inside door panel.

easy to do unscrewed the plastic on the inside of the door lifted it out of the way takeing care not to damage the wires that are connected to it for the soap dispenser. the old latch fell right out the 4 wires where a bugger to get off and i actually destroyed the switches while unhooking the wires i plugged the wires into the next latch that came with new switches put everything back together and i open and closes like brand new

removed inside panel disconnected switch replaced with new handle and switches.

Works great

Removed the upper spray supply manifold and the lower spray arm, and all other pieces to reach the chopper assembly, removing those pieces, installing the new pieces, and put everything back together. Success! The dishwasher is working as good as new.

i simply removed the screws holding the cover ithen removed the old handle by removing the electrical wires i then plugged the wires onto the new handle i then placed the handle back on the machine replaced all the screws plugged the unit back in and the little lady was so happy she could wash dishes again she bar-b-qued me a big t-bone steak for dinner. THANKS PARTSELECT YOU SAVED THE DAY.

remove door panel screws but in new handle renstaall panel screws done.

As a very capable "do-it-yourselfer," once I realized that I had a part that I could not repair, the first thing I did was go to partselect.com to find my part. The exploded diagrams made it easy to determine the correct part I needed. A very reasonable $25 dollars and 2 days later the part showed up on my doorstep, well packaged to protect it during shipping and was an exact replica of the failed part. Five minutes later, I had the part replaced and a wife who is once again grateful to not have to wash the dishes by hand. Thanks partselect.com you made me a hero!

I'm so happy I ordered these wheels, with them it's running
like new. Without the wheels it was making grinding sounds when it ran. You just push them onto the rack spokes and snap them in place. EASY!

i read how it was done on this web site

I probably could have nursed the dishwasher for years but with two young children it an impossiblity to achieve kitt gloves this repair required. My kids are just old enough to do dishes and the last thing I want is an accident with water running into the basement. Placing the order and receiving it almost too fast made the install simple, quick and my wife still hasn't noticed. I impressed myself with the quick turn-around but I repair cameras for a living so repairs are second hand.