Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AD65USL1 > Parts

AD65USL1 Whirlpool Dehumidifier - Parts

All parts for the Whirlpool Dehumidifier AD65USL1

Below is a list of all parts for the Whirlpool Dehumidifier AD65USL1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AD65USL1
1-14 of 57
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.79

Screw

$3.75

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$4.12

Float

If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. This device is located near the bucket and prevents the dehumidifier from overflowing. You will need to open up the dehumidifier to complete this repair. This product is approximately 4 inches in length. Many of our customers have rated this repair as easy. To complete the repair simply remove the clips that hold the float in place, attach the new float, and replace the clips.

$62.56

Bucket and Float Kit

This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moistu...

$6.23

Float Clip

The float clip works in a humidifier to ensure the float functions properly. The float is located near the humidifier bucket and monitors the water level as it rises and the clip keeps it in place. The float makes sure the water level is balanced and does not over flow. This float triggers the flow switch to shut off. If there is a defect with the clip, it can be a safety hazard as it might not be able to detect and stop an overflow. Make sure to unplug the dehumidifier from the power source before starting this replacement project as a safety precaution.

$6.20

TIE-WIRE

$6.28

Screw

Sold individually.

$35.40

Fan Blade - Black

This fan blade attaches to the motor in your dehumidifier. This fan has 7 blades that turn while the dehumidifier is operating. If you notice that your dehumidifier is malfunctioni...

$144.15

Fan Motor

This fan motor controls the circulating fan in the dehumidifier.

Hose Connector Cover

Castor

Also known as wheel or roller. This part is sold individually.

PAN-DRAIN

$118.55

Electronic Control Board

All Parts for the AD65USL1
1-14 of 57