Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AD50G1 > Parts

AD50G1 Whirlpool Dehumidifier - Parts

All parts for the Whirlpool Dehumidifier AD50G1

Below is a list of all parts for the Whirlpool Dehumidifier AD50G1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AD50G1
1-14 of 60
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$4.12

Float

If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. This device is located near the bucket and prevents the dehumidifier from overflowing. You will need to open up the dehumidifier to complete this repair. This product is approximately 4 inches in length. Many of our customers have rated this repair as easy. To complete the repair simply remove the clips that hold the float in place, attach the new float, and replace the clips.

$33.33

Humidistat Control

The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintai...

$62.56

Bucket and Float Kit

This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moisture from the air, which dehumidifies your room. The kit contains one bucket, one flat, and two screws for installation. The bucket is white and made of plastic. You may need to replace this part if your dehumidifier is no longer trapping the water properly. This is an authentic part from the genuine manufacturer, and you cannot order the parts individually.

$6.23

Float Clip

The float clip works in a humidifier to ensure the float functions properly. The float is located near the humidifier bucket and monitors the water level as it rises and the clip k...

$6.20

TIE-WIRE

$6.28

Screw

Sold individually.

$35.40

Fan Blade - Black

This fan blade attaches to the motor in your dehumidifier. This fan has 7 blades that turn while the dehumidifier is operating. If you notice that your dehumidifier is malfunctioning, you may need to replace the fan blade. This part is black in color, made of plastic, and is 9 inches in diameter. The fan blade is located in the interior of the dehumidifier. This is an OEM part sourced directly from the manufacturer. Be sure to disconnect your dehumidifier from the power source before you begin this repair. This part is sold individually.

$58.12

Bucket Water Level Switch

This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed j...

$144.15

Fan Motor

This fan motor controls the circulating fan in the dehumidifier.

$87.65

Bi-Metal Thermostat Control with Clamp

Also known as Dehumidifier anti-icing thermostat with clamp.

Hose Connector Cover

Castor

Also known as wheel or roller. This part is sold individually.

PAN-DRAIN

All Parts for the AD50G1
1-14 of 60