Models
>
AD40G1
AD40G1 Whirlpool Dehumidifier - Overview
Sections of the AD40G1
[Viewing 3 of 3]
Manuals & Care Guides for AD40G1
Click to downloadKeep searches simple, eg. "belt" or "pump".
Float
PartSelect #: PS11738360
Manufacturer #: WP1172075
If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. Thi...
$8.04
In Stock
Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$5.42
In Stock
Humidistat Control
PartSelect #: PS11738359
Manufacturer #: WP1168670
The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintain the temperature pr...
$81.09
In Stock
Bucket Water Level Switch
PartSelect #: PS992307
Manufacturer #: 1188814
This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed just by looking at it...
$102.77
In Stock
Fan Motor
PartSelect #: PS557949
Manufacturer #: 4389130
This fan motor controls the circulating fan in the dehumidifier.
$276.27
Special Order
Bi-Metal Thermostat Control with Clamp
PartSelect #: PS319575
Manufacturer #: 1168777
Also known as Dehumidifier anti-icing thermostat with clamp.
No Longer Available
Float Clip
PartSelect #: PS11738392
Manufacturer #: WP1186430
The float clip works in a humidifier to ensure the float functions properly. The float is located near the humidifier bucket and monitors the water level as it rises and the clip keeps it in place. Th...
No Longer Available
Zip Tie
PartSelect #: PS11753208
Manufacturer #: WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly t...
$8.04
In Stock
Castor
PartSelect #: PS318954
Manufacturer #: 1164241
Also known as wheel or roller. This part is sold individually.
No Longer Available
Questions And Answers for AD40G1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Be
August 16, 2021
My Whirlpool dehumidifier run fine but no water was collected. I did not feel the heat or warm air from the fan. Please help!
For model number AD40G1
Hello Be, thank you for your question. If the room temperature is over 65 degrees Fahrenheit and the dehumidifier is still not collecting water, there may be a problem with the fan motor. Part number: PS557949. I hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The Origional Humidistat Quit Working
The knob one turns to set the humidity level was removed. The two screws holding the top on were removed. The top was lifted and swung to the side. After noting which of the two wires went where on the humidistat the wires were removed. Small flat screwdrivers were used to pry back the plastic retainers on one side of the original fai
... Read more
led humidistat. The new one was put in place, the two wires were reattached. The knob was replaced. The top was positioned and its two retaining screws replaced. A magnetic phillips screwdriver was handy but not necessary. Piece of cake! Someone with ten thumbs could do it!! Thanks for the prompt courteous attention to the returned erroneous part! Dealing with partselect. Com was a pleasure. . . . . . Thanks!! P. S. The dehumidifier works like new now!!
Read less
Parts Used:
-
James from Silver Bay, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
9 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Evaporator freeze up
Troubleshoot on the schematic/wiring diagram to find the defective thermostat. Order a replacement part. Remove all outer covers to gain access to the thermostat. Only tool needed for this is a #2 phillips screwdriver. Cut the leads on the defective part and remove thermostat and replace thermostat, wire cutters/crimper required, splice
... Read more
the thermostat leads, Reassemble the outer covers.
Read less
Parts Used:
-
Greg from Suches, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the humidity control broke
Taking the case apart and replacing the control unit was a piece of cake. And the part arrived the very day after I ordered it.
Parts Used:
-
larry from tampa, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!