Models > AD40DBK0

AD40DBK0 Whirlpool Dehumidifier - Overview

Get Parts and Repair Help for AD40DBK0

If you know the dehumidifier repair part you need, you can browse the list of all parts on the AD40DBK0, or you can search by name or part description. You can also find your part by where it is located on the AD40DBK0 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AD40DBK0 [Viewing 3 of 3]

$2.70

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$3.96

FLOAT

$56.54

Bucket and Float Kit

$2.70

Hex Nut

Part may differ in appearance, but functions same as original.

$3.83

SCREW

$60.84

Bi-Metal Thermostat Control with Clamp

Also known as Dehumidifier anti-icing thermostat with clamp.

$50.79

Bucket Water Level Switch

This part is used to prevent water overflow when the bucket gets full.

$3.83

Float Clip

$3.83

TIE-WIRE

$112.27

Fan Motor

This fan motor controls the circulating fan in the dehumidifier.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Evaporator freeze up

  • Customer: Greg from Suches GA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 6 of 9 people found this instruction helpful
Troubleshoot on the schematic/wiring diagram to find the defective thermostat. Order a replacement part. Remove all outer covers to gain access to the thermostat. Only tool needed for this is a #2 phillips screwdriver. Cut the leads on the defective part and remove thermostat and replace thermostat, wire cutters/crimper required, splice the thermostat leads... read more

the dehumidifier was not shutting off when water level was full

  • Customer: Steven from Owings Mills MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 6 people found this instruction helpful
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy read more

Broken Floar Arm

  • Customer: Stephen from University City MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 1 of 5 people found this instruction helpful
Cut off Clips. Replace Float. Replace Clips read more