Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AD25DSS0 > Parts

AD25DSS0 Whirlpool Dehumidifier - Parts

All parts for the Whirlpool Dehumidifier AD25DSS0

Below is a list of all parts for the Whirlpool Dehumidifier AD25DSS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AD25DSS0
1-14 of 53
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Screw, 11-16 x 3/4

$34.20

Humidistat Control

The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintain the temperature properly. For this repair, screwdrivers are the only tools needed. First remove the knob and the screws from the top. Pry back the plastic retainers on one side of the old humidistat and remove wires before installing the new part and reattaching the two wires that connect to it. Remember to unplug the humidifier from the power source before installation.

$4.79

SCREW

$4.87

TIE-WIRE

$4.94

Screw, 8-18 x 1/2

$35.37

Capacitor

$22.54

Filter

$58.12

Bucket Water Level Switch

This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed just by looking at it. You will need to perform a continuity test. This will determine if a continual electrical path is present. If you notice that dehumidifier will not run even when the bucket is empty, it might be due to the switch needing to be replaced. To access the part, you will need to remove all the outer housing. The switch is located in a plastic holder found on the inside wall.

Caster

$72.46

BUCKET

FLOAT

Wheel, Blower

$163.20

Motor, Fan

$35.62

Valve, Access (1/4``)

All Parts for the AD25DSS0
1-14 of 53