AD0402XA2 Whirlpool Dehumidifier - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The humidifier would run continuously regardless of the humidity setting.
I removed the old humidistat and replaced it with the new one which was an exact fit.
Parts Used:
-
Stephen from Richfield, NC
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dehumidifer collection pan (bucket) overflowing with water
The unit should cutoff when the pan gets full enough for it to depress the pan full switch on the back of the unit. Used an ohm-meter to check and see that this switch was bad. Replaced with this part and now it cuts off again when the pan is full. Not hard at all. Take the cover off the unit (screws) then take the switch out (nut) and replace.
Parts Used:
-
Carl from Tuscaloosa, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!