Models > AD0252XZ1 > Instructions

AD0252XZ1 Whirlpool Dehumidifier - Instructions

All installation instructions for AD0252XZ1 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dehumidifier repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the AD0252XZ1
1-12 of 12
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Refrigerator stop working

  • Customer: SAL from UPLAND CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 15 of 23 people found this instruction helpful
First I removed the relay and over load and exam. Saw that the relay was burnt. Before I order the part I check to see if the compressor was still working by jumping the common start and run terminals.It did. I also checked the start capacitor with a capacitor tester it was good. I than order the part which came the very next day.Installed the part

The compressor did not kick in....

  • Customer: Mike from Sherman CT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 7 of 14 people found this instruction helpful
The repair was easy......however I had no help to identify the problem and after I did I had no description or schematic of how to connect the parts. The old defective part was not identical to the new one. some written material would have been helpful.
Z. Benedek

Cimpressor would not start

  • Customer: Oliver from Madison AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: