Models > AD0122XM3

AD0122XM3 Whirlpool Dehumidifier - Overview

Get Parts and Repair Help for AD0122XM3

If you know the dehumidifier repair part you need, you can browse the list of all parts on the AD0122XM3, or you can search by name or part description. You can also find your part by where it is located on the AD0122XM3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dehumidifier. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AD0122XM3 [Viewing 3 of 3]

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$2.72

Water Inlet Hose Washer

Sold Individually. Order quantity needed.

$2.70

Hex Nut

Part may differ in appearance, but functions same as original.

$46.45

Condensation Drip Pan

$3.83

TIE-WIRE

$30.39

SEALER-GUM

$4.60

NUT

DISCONTINUED

$3.83

SCREW

$31.93

CORD-POWER

Common Symptoms of the AD0122XM3 [Viewing 1 of 21]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

old fan motor made horrible screeching sound and siezed up

  • Customer: Dave from Roswell GA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 4 people found this instruction helpful
Removed 4 hex head screws around base of metal housing and 2 screws on bottom front holding on plastic grating and one screw holding housing to switch plate at top front. Hinged grating on back just pops off. Removed two screws holding fan motor on. Unclipped wire terminals (2). Bolted new fan in place.

One hitch was that one of the little ter... read more

Dehumidifier froze up to a solid block of ice

  • Customer: Robert from Ridley Park PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 6 people found this instruction helpful
After completely thawing the frozen dehumidifier, I knew the chiller still worked but realized the blower fan did not spin. I ordered a replacement part from PartSelect.com. It arrived in 2 days. With unit unplugged, I removed set knob at the top of the front of the unit, removed two screws at bottom and removed the front grill face exposing the fan assem... read more