Models > ACQ189XS0

ACQ189XS0 Whirlpool Air Conditioner - Overview

Get Parts and Repair Help for ACQ189XS0

If you know the air conditioner repair part you need, you can browse the list of all parts on the ACQ189XS0, or you can search by name or part description. You can also find your part by where it is located on the ACQ189XS0 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

SCREW

Sold individually.

$2.70

Screw

This screw is sold individually.

$2.70

Screw, 11-16 x 3/4

$2.70

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$29.25

ADHESIVE

$38.02

Remote Control

$3.54

SCREW

$3.54

TIE-WIRE

$39.30

BLADE-FAN

$30.49

COVER-WNTR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

old motor locked up had to replace

  • Customer: REX from PLEASUREVILLE KY
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 11 of 13 people found this instruction helpful
had to remove outer cover, then the foam parts covering the fan cage and then remove the five screws that hold the fan/motor unit in the base, after that I cut the wires at the controls so I could match the wire colors up with the new motor, had to loosen the clamps that hold the fans on the shaft at both ends and slide the fans off,when the new motor came I... read more

Lost my remote

  • Customer: Dana from Nuevo CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
I really didnt repair anything, but
I wanted to share with you,my experience with parts select. My order was processed lightning fast, the shipping was lightning fast, the remote was the correct one I ordered,and the whole experience was 100% perfect. Thank you so much. read more

broken exhaust fan

  • Customer: Joe from Longview AL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Identified the problem as broken exhaust fan and ordered part. Disassembled unit, installed fan however during the cleaning process the blower fan was broken but would still work. Tested the unit for functionality, fan motor failed. Ordered the blower fan and motor. Finished the cleaning installed the motor and two fans. Assembled the unit and returned... read more