Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ACQ102RA0

ACQ102RA0 Whirlpool Air Conditioner - Overview

Get Parts and Repair Help for ACQ102RA0

If you know the air conditioner repair part you need, you can browse the list of all parts on the ACQ102RA0, or you can search by name or part description. You can also find your part by where it is located on the ACQ102RA0 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ACQ102RA0

[Viewing 4 of 4]

Manuals & Care Guides for ACQ102RA0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.75

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, ref...

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$30.25

Silicone Rubber Adhesive - 2 oz

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application re...

$4.87

Control Knob

This air conditioner control knob is gray in color, and measures approximately 1 inch in diameter. This replacement part allows you to properly control all the air conditioner settings. If your knob has broken or gone missing it will need to be replaced. This repair requires no tools to complete. You simply remove the old knob by pulling it off and press the new knob into place by lining it up with the shaft. This genuine OEM replacement knob is sold individually.

$23.20

Motor Clip

$83.80

Thermostat with Clip and Guide

This thermostat is for residential air conditioners and is responsible for regulating temperature. The thermostat comes with the clip to attach it to your AC and a visual guide to help with the repair. If your thermostat will not cool properly, or the compressor will not switch on or off, you could have a faulty thermostat. Before you replace your thermostat, remove it from the unit and clear any dust or debris that has built up, because a buildup of dust can interfere with the reading. If the issue continues, you should replace the part. Make sure the power is disconnected to your air conditioning unit before you begin the repair.

$46.33

Fan Blade

$4.87

TIE-WIRE

$40.20

Air Filter

$28.36

SEALER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ac Would Cool But Compresser Would Not Cycle On &Off

  • Customer: Ron from Knob Noster, MO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 6 of 13 people found this instruction helpful
Replaced the temp control and sensor. Controls on this unit are easy to get to and electrical connections were slide ons read more

Dosen't seem to fit.Won't go all the way on.

  • Customer: David from Nashua, NH
  • Difficulty: Very Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 10 people found this instruction helpful
put the knob on and pushed it as far as it would go. read more

Both motor clips broken - >40 year old dryer!!

  • Customer: susan from Socorro, NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).

Guessed that the parts were motor clips (no pix in the web site!)

Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube... read more