Models > ACO27DEW1 (P1132334N W)

ACO27DEW1 (P1132334N W) Amana Oven - Overview

Get Parts and Repair Help for ACO27DEW1

If you know the oven repair part you need, you can browse the list of all parts on the ACO27DEW1, or you can search by name or part description. You can also find your part by where it is located on the ACO27DEW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for ACO27DEW1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$18.07

2 Piece Broiler Pan

$37.50

Bake Element - 240V 2800W

This bake element is of a fully open fixed style and is used for electric ranges and ovens. The depth of the terminals is 2-1/2 inches.

$36.89

Oven Light

$2.70

Screw

This screw is sold individually.

$3.82

Nut

$24.03

Screw

Latch Handle Knob - White

This part covers the end of the latch arm which is part of the door latch assembly.

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

LATCH ARM

Common Symptoms of the ACO27DEW1 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven element burnt out and broke apart.

  • Customer: Lana from Pineville WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 14 people found this instruction helpful
After ordering the element, found out it was the wrong element, I needed an 18.5 inch x 15.5 instead of the 15 1/4 x 15 1/2"...I slowly bent the element in shape to fit my oven. It works beautiful.
But for you guys, order the right one. Don't forget to measure your old elements spread from connection to connection. Install the new element and then test ... read more

hard to get old one out

  • Customer: robert from chatham VA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 16 of 40 people found this instruction helpful
easy to put in read more

Element broken, oven would'nt heat

  • Customer: frances from Coffee Springs AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
First I removed the two screws that hold the element in place. Then I pulled the element out about 3 inches and disconnected the two wires. Reconnected the new wires, put the screws back in and the oven WORKED!! read more