Models > ACO27DE (P1172603S E)

ACO27DE (P1172603S E) Maytag - Overview

Get Parts and Repair Help for ACO27DE

If you know the repair part you need, you can browse the list of all parts on the ACO27DE, or you can search by name or part description. You can also find your part by where it is located on the ACO27DE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . We’ve also included any installation videos we have for ACO27DE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$18.07

2 Piece Broiler Pan

$37.50

Bake Element - 240V 2800W

This bake element is of a fully open fixed style and is used for electric ranges and ovens. The depth of the terminals is 2-1/2 inches.

$36.89

Oven Light

$2.70

Screw

This screw is sold individually.

$2.70

Nut

$24.33

Screw

KNOB- CLOC

$55.64

GASKET- OV

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

Common Symptoms of the ACO27DE [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven element burnt out and broke apart.

  • Customer: Lana from Pineville WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 14 people found this instruction helpful
After ordering the element, found out it was the wrong element, I needed an 18.5 inch x 15.5 instead of the 15 1/4 x 15 1/2"...I slowly bent the element in shape to fit my oven. It works beautiful.
But for you guys, order the right one. Don't forget to measure your old elements spread from connection to connection. Install the new element and then test ... read more

Element broken, oven would'nt heat

  • Customer: frances from Coffee Springs AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
First I removed the two screws that hold the element in place. Then I pulled the element out about 3 inches and disconnected the two wires. Reconnected the new wires, put the screws back in and the oven WORKED!! read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more